Ultra Combi Cam – FAQ

How Do I set my combination?

For first time use – The factory default code for the Ultra Combi Cam range is all 0’s.

Write your new desired code down. Dial up your existing combination in line with the arrow on the front. Once the current combination is entered , press and hold the round button, located on the top of the lock. Continue holding the button down and do not release it until your new combination is completely set.

Ensure that you store your combination in a safe and secure location.

I have entered my combination, but my lock will not unlock?

Ensure that the combination digits are correctly aligned with the arrow on the face of the lock. Spin off the dials and then try your combination once more. If the combination doesn’t work, contact your locker administrator to check your previous code with the code discovery feature using the master key or probe.

How Do I discover a lost or forgotten code/combination?

7440 – Contact your Locker administrator who can provide your lost code using the master override key.

7432 – Contact your locker administrator who can provide access to your locker via the master key. Once inside the locker, insert the code discovery probe into each hole, spinning the dials on the front of the lock until it is stopped.

Once your combination has been discovered, please ensure that you make note of it and store it in a safe and secure location.

Didn’t find what your looking for? Contact Us
or view our Technical Support documents

0

Start typing and press Enter to search